欢迎到:淄博金冠厨房设备有限公司

全国热线:400-0533-137

新闻
首页 > 新闻 > 内容
排烟罩的黑白铁加工
编辑:淄博金冠厨房设备有限公司   时间:2017-11-27

 不锈钢的黑白铁加工排烟罩选用的是微电脑操控,自动化程度十分高,功用十分完全。 猪笼是用的抽风机,噪音低、风力大、运用的寿命长,黑白铁加工选用的是高清洁、无污染化油剂,这就增加了雾化水喷淋方式,排油烟的设备由曩昔环境污染型改为现如今的室表里无污染排放,全面净化了室表里环境。

  Stainless steel black and white iron processing, smoke hood is controlled by microcomputer, the degree of automation is very high, the function is very complete. Cage is fan with the wind, low noise, long service life, white iron processing is used in oil clean and no pollution, which increases the spraying water, lampblack machine is composed of the past environmental pollution type to present indoor polluting emissions, comprehensive purification the indoor and outdoor environment.

  黑白铁加工排烟罩为了便利清洗,出烟口配有活动式的油烟过滤网,内部装备耐高温的防爆打,全体外观看起来简练漂亮。

  Black and white iron processing smoke hood, in order to facilitate cleaning, smoke outlet with movable soot filter screen, the internal configuration of high temperature explosion-proof fighting, the overall appearance looks simple and beautiful.

  济南通风管道为了防止或削减管道的损坏事端,采纳必要的办法包含:

济南通风管道加工

  The Ji'nan ventilation pipeline shall take necessary measures to prevent or reduce the damage to the pipeline, including:

  1.通风管道有必要由有资格的规划单位进行规划并契合规划规范的规则;

  1. ventilation ducts must be designed by qualified design units and comply with the design specifications;

  2.通风管道体系应按规则装设安全泄压设备并坚持其活络好用;

  2. the ventilation piping system shall be equipped with safety relief devices according to the regulations and keep it sensitive and easy to use;

  3.排烟罩采纳有效办法防止大气及介质对管道的腐蚀;

  3., take effective measures to prevent the atmosphere and medium corrosion of the pipeline;

  4.管道安装工程投用前应进行役前查看和查验,管系结构、资料、焊接、热处理、压力试验等关键环节有必要契合规则要求;

  4. the pipeline installation project should be inspected and accepted before commissioning, and the key links such as piping structure, material, welding, heat treatment and pressure test must meet the requirements;

  5.运转操作有必要严格执行操作规程,操控工艺目标,根绝超温、超压运转;

  5. operation operation must strictly carry out operating procedures, control process indicators, and eliminate overheating and over pressure operation;

  6.检修或部分替换管道时,防止错用或不合理代用而下降管道的极限应力;

  6. repair or partial replacement of the pipeline, to avoid misuse or not reasonable substitute and reduce the ultimate stress of the pipe;

  7.加强对通风管道的保护查看和定期查验;

  7. strengthen the maintenance inspection and regular inspection of the ventilation pipe;

  8.对长时间放置不用、保护不良的管道,因发作大面积腐蚀、厚度减薄、强度削弱,排烟罩再次启用前应按规则进行全面查验。

  8. for the long-term use of no maintenance of the pipeline, due to a large area of corrosion, thickness reduction, strength weakened, before re opening, should be carried out in accordance with the provisions of a comprehensive inspection.