It is very important to select the installation position of the range hood. Make sure the pipe is shorter, the better. Some owners in order to pull the pipe appearance, is relatively long, so, turn off the lampblack machine, the pipe will gather a lot of fumes discharged out, and then back to the room.
In addition, in order not to destroy the original main and auxiliary flue, the direction of its opening is not optional, can be modified, must be hit in the flue. Owners can not change according to their preferences. However, the bore of the flue can be enlarged, but be careful not to damage the tailgate of the secondary flue.
Now, some owners will choose smoke lampblack machine, the flue hole below, smoke down the row, leading to the side flue at the bottom, this will not affect the smoke? Owners can rest assured that in the main smoke flue will all go up, this so-called "cupping" effect will be more obvious, more not easy to produce odor phenomenon.
Some owners in order to avoid smoke problems, give up the original flue, directly in the window opening smoke. It's OK to do so, but there are several points to note. First of all, before opening the window or wall, must be approved by the property. Plus, it's about security.
General exhaust pipe end is made of metal material, if the hole is too small, the metal heat transfer may cause cracking of glass, and pedestrians. And smoke pipe leading to the window, the strong north wind blowing, will lead to soot intrusion, will also increase the range hood load, shorten the service life of range hood.
The best solution is to put the pipe out of the hole after it has been extended so that it can avoid the rain and water flowing into the pipe and keep the windshield outside.
We will use good, appropriate service, so that customers feel the warmth of family ties, always depending on the safety of customers, such as ourselves. We will use our natural advantage to create a unique product that will give consumers a unique mood to enjoy the product.